Automotive & EV

Automotive wire harness protected with abrasion-resistant tubing and sleeving

Automotive wire harness, connector and battery-pack protection sleeving for conventional and EV platforms.

Recommended products

Aluminum Foil Textile Crimped Sleeving

Textile & Fabric · High Temperature

Glass Fiber Corrugated High-Temperature Resistant Sleeve

Fiberglass & Silicone Coated · High Temperature

Self-Winding Textile Sleeve

Textile & Fabric · Standard Insulation

Silicone Heat Shrink Tubing

Silicone Rubber · High Temperature

Spiral Fiberglass Bellows Tube

Fiberglass & Silicone Coated · High Temperature

Application deep-dives

Focused pages inside this route, with the published ratings and the inputs we need to quote.

Automotive Harness Sealing

Sealing ultrasonic weld and crimp splices against water travel on wet routes, with adhesive-lined tubing.

EV High-Voltage Protection

Abrasion, heat and colour on pack and HV harness runs, with component ratings kept separate from system approval.

Need a custom size or spec?

Send us the cable OD, voltage and environment: we return a sized recommendation.

Request a Quote

Read our buying guides & specification articles →

Selection inputs for quotation

Automotive and EV harness runs mix three hazards in one loom: under-hood heat, abrasion from movement, and fluid or salt spray. Specifying one sleeve for all three usually over-pays on easy runs or under-protects the hard ones. Split the loom by zone (protected cabin routing, hot engine-bay runs, and exposed chassis points), then match material per zone: braided sleeving for flex and abrasion, conduit or corrugated tubing where routing is fixed, and adhesive-lined heat shrink at sealed joints. For a sized quote, send the temperature class, the fluid list, the bundle OD and the bend radius; for HV lines, note the voltage and the creepage the pack requires.