Low double-wall heat-shrinkable sleeve lining with hot melt adhesive half flexible heat shrinkable tube, the outer layer is composed of radiation crossiinked polyolefin, the inner layer is a specially designed rubber lining; When heated in Wall melt, and the outer wall or contraction pore filling aperture, after cooling, double-wall pipe wall thickness, strong.
Low level of flame retardant: UL224 VW - 1
Low product has low temperature shrinkage, soft, flame retardant, waterproof, oil resistance, etc.
@ Low product shrinkage ratio: 2:1 3:1 4:1
Dual Wall Heat Shrink Tubing in Heat Shrink Tubing
This product is widely used in electronic equipment wiring is waterproof, the seal fixed wire branch, metal pipeline corrosion protection, and prevent from polymer chain relaxation of pine And falling out, under water lighting^ automobile brake pipe, the wire and advanced anticorrosion protection.
性能 Properties |
特性要求(Specification Requirement) |
Physical |
Shrink Temperature |
90-110 c |
Cont丨nuous Opera丨ing Temperature |
-55 C-125 c |
Tensile strength after aging |
10.4Mpa |
Elongation after aging |
>200% |
Radial Shrinking Ratio |
33%(3:1)OR25%(4:1) |
Longitudinal Shrinking Ratio |
< 土 15% |
Electrical |
Dielectric Voltage withstan |
>2500V |
Volume resistivity |
>1014^.CM |
Chemical |
Conosion |
NO corrosion |
Copper stability |
Good to Excellent |
Flammability |
VW-1 |
|
mm |
INCH |
mm |
INCH |
mm |
INCH |
mm |
INCH |
mm |
INCH |
|
|
|
|
|
|
|
|
|
|
|
1/8 I |
3.2 |
0.125 |
0.57 |
0.016 |
1.00 |
0.039 |
1.00 ?.28 |
0.039 土 0.010 |
0.50 |
0.020 |
3/16 | |
4.8 |
0.187 |
0.57 |
0.016 |
1.50 |
0.059 |
1.00 士 0.28 |
0.039 士 0.010 |
0.50 |
0.020 |
1/4 I |
6.4 |
0.250 |
0.57 |
0.016 |
2.00 |
0.079 |
1.00 ?.28 |
0.039 士 0.010 |
0.50 |
0.020 |
3/8 I |
9.5 |
0.375 |
0.64 |
0.016 |
3.00 |
0.118 |
1.00?.28 |
0.055?.010 |
0.61 |
0.024 |
1/2 I |
12.7 |
0.500 |
0.80 |
0.016 |
4.00 |
0.157 |
1.78 士 0.38 |
0.070 士 0.010 |
0.76 |
0.030 |
3/4 I |
19.1 |
0.750 |
0.93 |
0.020 |
6.00 |
0.236 |
2.25?.55 |
0.088 士 0.020 |
0.76 |
0.030 |
1 I |
25.4 |
1000 |
1.00 |
0.020 |
8.00 |
0.315 |
2.54 士 0.55 , |
0.100 土 0.020 |
1.02 |
0.040 |
1-1/4 I |
30.0 |
1.200 |
1.20 |
0.025 |
10.00 |
0.394 |
2.54士0.55 i |
0.100士0.020 |
1.02 |
0.040 |
|
|
We manufacture the best PTFE sleeving and fiberglass Sleeving for all voltage and temperatures. We are an official supplier for companies like parts of companies like Hyundai,CITROEN,HONDA etcs, with top quality products and very competitive price....
